# Elba EX 166 FG Freestanding Cooker 100 cm

> Elba, AED 6,624, out of stock at KitchenByPro.

Canonical: https://kitchenbypro.com/shop/product/elba-ex-166-fg-freestanding-cooker-100cm/

| Field | Value |
| --- | --- |
| Brand | Elba |
| Price | AED 6,624 |
| Availability | Out of stock |
| SKU | IT0022423 |

## Specifications

| Specification | Value |
| --- | --- |
| Size | 100cm |

## Description

Functions and performance
Oven features
30 M-bar regulator
Forced air convection mode
Automatic ignition
Safety devices on oven/grill
Double glass door + light
1 Tray
1 Shelf
Cooktop features
Stainlesss steel cooktop 18/10
6 Gas burners of which 2 double ring wok burners
1 triple ring
Enamelled cast-iron pan-supports
Safety devices on all burners
Cast-iron wok stand
Easy to clean enamel
Head Office / Showroom Dubai
PO Box 37959, Dubai
Showroom Abu Dhabi
PO Box 28239, Abu Dhabi
Service Center
Uae 600 555 602
Mvpappliances.com
Dual fuel cooker
Cuisiniere mixte
Made in Italy
Elba quality
present booklet.
characteristics of the appliances.
de se trouver dans cette notice.
nécessaires pour faire face à des exigences de fabrication ou de commercialisation.
Dear Customer
Thank you for having purchased and given your preference to
our product.
The safety precautions and recommendations reported below
a means by which to make full use of the features offered by your
appliance.
Please preserve this booklet carefully. It may be useful in future
either to yourself or to others in the event that doubts should
arise relating to its operation.
This appliance must be used only for the task it has
explicitly been designed for, that is for cooking foodstuffs.
Any other form of usage is to be considered as inappropriate
The manufacturer declines all responsibility in the event
of damage caused by improper, incorrect or illogical use of
Important safety precautions and recommendations
solely for the cooking of domestic (household) food and is
not suitable for any non domestic application and therefore
should not be used in a commercial environment.
within a non domestic environment i.e. a semi commercial
commercial or communal environment.
Read the instructions carefully before installing and using
This appliance has been designed and manufactured in
compliance with the applicable standards for the household
cooking products, including those for surface temperatures.
Some people with sensitive skin may have a more pronounced
temperature perception with some components although these
parts are within the limits allowed by the norms.
The complete safety of the appliance also depends on the correct
use, we therefore recommend to always pay a extreme attention
while using the product, especially in the presence of children.
not damaged and that the oven door closes correctly.
In case of doubt, do not use it and consult your supplier or a
professionally qualified technician.
Packing elements (i.e. plastic bags, polystyrene foam, nails
packing straps, etc.) should not be left around within easy reach
of children, as these may cause serious injuries.
Some appliances are supplied with a protective film on steel and
aluminium parts. This film must be removed before using the
recommended when handling or cleaning this appliance.
Do not attempt to modify the technical characteristics of
the appliance as this may become dangerous to use. The
manufacturer declines all responsibility for any inconvenience
resulting from the inobservance of this condition.
ventilated room in compliance with the applicable regulations.
Do not operate your appliance by means of an external timer or
separate remote-control system.
Do not carry out cleaning or maintenance operations on the
appliance without having previously disconnected it from the
electric power supply.
replacing the oven lamp to avoid the possibility of electric shock.
Do not use a steam cleaner because the moisture can get into
the appliance therefore making it unsafe.
Do not touch the appliance with wet or damp hands (or feet).
Do not use the appliance whilst in bare feet.
If you should decide not to use this appliance any longer (or
decide to substitute another model), before disposing of it, it
is recommended that it be made inoperative in an appropriate
manner in accordance to health and environmental protection
regulations, ensuring in particular that all potentially hazardous
parts be made harmless, especially in relation to children who
could play with unused appliances.
The various components of the appliance are recyclable. Dispose
of them in accordance with the regulations in force in your country.
If the appliance is to be scrapped, remove the power cord.
Children less than 8 years of age shall be kept away unless
continuously supervised.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
The manufacturer declines all liability for injury to persons or
damage to property caused by incorrect or improper use of the
become hot; they remain hot for some time after use.
Care should be taken to avoid touching heating elements (on
the hob and inside the oven).
The door is hot, use the handle.
To avoid burns and scalds, young children should be kept
away.
Models with warming drawer only: care should be taken to
avoid touching heating element inside the drawer.
Make sure that electrical cables connecting other appliances in
the proximity of the cooker cannot come into contact with the hob
or become entrapped in the oven door.
dangerous and may result in fire. NEVER try to extinguish a fire
with water, but switch off the appliance and then cover flame e.g.
with a lid or a fire blanket.
surfaces.
objects etc., disconnect the appliance from the electrical power
supply to avoid the possibility of electric shock and call Customer
Service.
safety requirements laid down for this type of product category.
However special care should be taken around the rear or the
underneath of the appliance as these areas are not designed or
intended to be touched and may contain sharp or rough edges
instructions
Furnish the interior of the oven as described in the chapter
Cleaning and maintenance .
Switch on the empty oven on max to eliminate grease from the
heating elements.
Disconnect the appliance from the electrical power supply, let
the oven cool down and clean the interior of the oven with a
cloth soaked in water and neutral detergent; then dry carefully.
scrapers to clean the oven door glass since they can scratch the
Do not line the oven walls or base with aluminium foil. Do not place
baking trays or the drip tray on the base of the oven chamber.
Do not cover the hob with aluminium foils.
FIRE RISK! Do not store flammable material in the oven or in the
storage compartment.
Always use oven gloves when removing the shelves and food
trays from the oven whilst hot.
Do not hang towels, dishcloths or other items on the appliance or
its handle as this could be a fire hazard.
the oven base or tray. Remove spillages as soon as they occur.
Do not stand on the cooker or on the open oven door.
Always stand back from the appliance when opening the oven
food.
a time as possible before and after cooking. This is to avoid
contamination by organisms which may cause food poisoning.
Take particular care during warmer weather.
term cooking process has to be supervised continuously.
The appliance must not be installed behind a decorative door in
order to avoid overheating.
The oven accessories (e.g. oven wire rack) must be fitted
correctly as indicated at page 49.
If the power supply cable is damaged, it must be replaced only
by an authorized service agent in order to avoid a hazard.
If the appliance is not fitted with a supply cord and a plug, or with
other means for disconnection from the supply mains having a
overvoltage category III conditions, means for disconnection
must be incorporated in the fixed wiring in accordance with the
wiring rules.
during use.
Care should be taken to avoid touching heating elements.
of the cooking appliance or indicated by the manufacturer of the
appliance in the instructions for use as suitable or hob guards
incorporated in the appliance. The use of inappropriate guards
Advice for the
installer
Important
The appliance is designed and approved for domestic use only and should not be
installed in a commercial, semi commercial or communal environment.
Your product will not be guaranteed if installed in any of the above environments
and could affect any third party or public liability insurances you may have.
This appliance is to be installed, regulated and adapted to function only by an authorized
person in compliance with the current local regulations in force and in observation of
Incorrect installation, for which the manufacturer accepts no responsibility, may cause
personal injury or damage.
This appliance shall only be serviced by authorized personnel.
Always disconnect the appliance from mains power supply before carrying out any
maintenance operations or repairs.
handling or cleaning of this appliance.
The walls of the units must not be higher than work top and must be capable of
resisting temperatures of 70°C above room temperature.
We would point out that the adhesive which bonds the plastic laminate to the
furniture must withstand temperatures not less than 150°C to avoid delamination.
Do not install the appliance near inflammable materials (eg. curtains).
Some appliances are supplied with a protective film on steel and aluminium parts.
This film must be removed before using the cooker.
Warning!
When correctly installed, your product meets all safety requirements laid down for
this type of product category. However special care should be taken around the rear
or the underneath of the appliance as these areas are not designed or intended to be
touched and may contain sharp or rough edges, that may cause injury.
The installation conditions, concerning protection against overheating of the surfaces
adjacent to the cooker, must conform to figs. 1.1 A or 1.1b.
The appliance must be kept no less than 200 mm away from any side wall which exceeds
the height of the hob surface (figs. 1.1 A or 1.1b).
The veneered syntetical material and the glue used must be resistant to a temperature of
150°C in order to avoid ungluing or
deformations.
Curtains must not be fitted immediatly
behind appliance or within 500 mm of
If the cooker is located on a pedestal
it is necessary to provide safety
measures to prevent falling out.
The appliance must be housed in
heat resistant units.
The walls of the units must not be
higher than work top and must be
capable of resisting temperatures
of 70°C above room temperature.
Do not instal the appliance
near inflammable materials (eg.
curtains).
Class 1
(fig. 1.1 A)
easily inspected or using rigid or
flexible metal pipe.
A space of at least 2 cm must be left
between the cooker and any adjacent
furniture, which must not exceed the
Class 2
Subclass 1
(fig. 1.1b)
Fig. 1.1b
Fig. 1.1 A
Some models only
Backguard (supplied with
Some models only)
Before installing the cooker, assemble the
backguard C (fig. 1.5).
The backguard C can be found
packed at the rear of the cooker.
Before assembling remove any
protective film/adhesive tape.
Remove the two spacers A and the
screw B from the rear of the cooktop.
Assemble the backguard as shown
in figure 1.5 and fix it by screwing the
central screw B and the spacers A .
Fig. 1.5
Levelling the cooker
The cooker is equipped with 4 LEVELLING
FEET and may be levelled by screwing or
unscrewing the feet with a spanner (fig.
The adjustable feet are already fitted to the
cooker but the locking nuts which can be
found in the oven packaging require to be
fitted as detailed on figures 1.3 to 1.4.
It is important to observe the prescriptions
of figures 1.3 to 1.4.
Fig. 1.2
Fig. 1.3
Fig. 1.4
Moving the cooker
out this manoeuvre to prevent damage to the adjustable feet (fig. 1.6).
Warning
position (fig. 1.7).
When moving cooker to its final position
DO NOT DRAG (fig. 1.8).
Lift feet clear of floor (fig. 1.6).
Fig. 1.8Fig. 1.7
Fig. 1.6
Anti-tilt bracket
bracket to the rear of the appliance and securely fixing it to the wall.
To fit the anti-tilt bracket
1. After you have located where the cooker is to be positioned, mark on the wall the
place where the 2 screws of the anti-tilt bracket have to be fitted. Please follow the
indications given in fig. 1.9.
2. Drill two 8 mm diameter holes in the wall and insert the plastic plugs supplied.
Important! Before drilling the holes, check that you will not damage any pipes
3. Loosely attach the anti-tilt bracket with the 2 screws supplied.
engage in the slot on the cooker’s back, as shown in fig. 1.9.
5. Tighten the screws attaching the anti-tilt bracket.
Attention!
When sliding the cooker into place pay special attention not to trap the power
supply cable in the stability bracket.
Pay special attention to the gas connection hose.
Fig. 1.9
Extractor hood
combustion
Air vent
extract products
Fig. 1.11Fig. 1.10
H min 650 mm
Ventilation requirements
The appliance must be installed in compliance with applicable local regulations
concerning ventilation and the evacuation of exhaust gases.
Intensive and prolonged use may require extra ventilation, e.g. opening a window
or more efficient ventilation increasing the mechanical suction power if this is fitted.
Choosing suitable surroundings
the gas can burn (in compliance with applicable local regulations).
The flow of air must come directly from one or more openings made in the outside walls
with a free area of at least 100 cm2 (or refer to applicable local regulations).
The openings should be near the floor and preferably on the side opposite the exhaust for
combustion products and must be made so that they cannot be blocked from either the
inside or the outside.
When these openings cannot be made, the necessary air can come from an adjacent
compliance with applicable local regulations).
cupboard or extractor hood positioned immediately above (see fig. 1.10).
Discharging products of combustion
of combustion of the gas appliance to be discharged (fig. 1.10).
If this is not possible, an electric fan may be used, attached to the external wall or the
under the heading Choosing suitable surroundings .
Important !
This appliance must be installed and serviced only by a suitably qualified
registered installer. The installer shall refer to the local standards in force.
Failure to install the appliance correctly could invalidate any manufacturer’s
Before installation, make sure that the local distribution conditions (gas type and
adjustment conditions are given on the plate or the label.
If the gas pressure (for which the appliance is to be used) is variable or if it is
not within the values indicated on the rating plate, it is mandatory to install a
operating pressure to the appliance (as per rating plate).
The regulator must be installed, adjusted and tested by a qualified technician.
be extremely dangerous and may result in serious injury to the user. Damage to
the appliance could occur if not observing this condition.
The manufacturer declines every responsibility for any inconvenience resulting
from the inobservance of this condition.
This appliance is supplied for use on LPG (check the gas regulation label attached on the
appliance).
This appliance is supplied for use on Natural gas or LPG (check the gas regulation label
attached on the appliance).
cannot be used on any other gas (LPG) without modification. The appliances are
manufactured for conversion to LPG.
be used on any other gas (Natural gas) without modification. The appliances are
manufactured for conversion to Natural gas.
If the Natural gas/LPG conversion kit is not supplied with the appliance this kit can be
purchased by contacting the After-Sales Service.
Operating pressure: 2.8 kPa.
This appliance is manufactured for conversion to G20 (NATURAL GAS) if required and is
supplied with a conversion kit.
This appliance must only be connected to NATURAL GAS after a NATURAL GAS
conversion kit has been fitted.
Connecting the appliance to the gas supply
The gas connection must be carried out by an authorised person according to the relevant
standards.
compliance with applicable regulations.
Connect the cooker to the gas mains utilizing rigid or flexible pipes.
The unused inlet pipe must be closed off with the plug and sealing washer supplied
(fig. 2.1b).
Fig. 2.1 A
Fig. 2.1b
Right or left
Manifold male
pipe fitting
Sealing
washer (#)
1/2 G cylindrical
(ISO 228 to 1) male
(ISO 228 to 1) female
(#) Already fitted on the right or
left inlet pipe
Fitting the plug on the unused
terminal of the gas inlet pipe
Possible gas connections
Imporant!
A rubber hose connection shall only be made if permitted by the applicable local
regulations.
The gas connection is made up of
the terminal fitting of the inlet pipe (right-hand or left-hand)
sealing washer
the appropriate hose holder (for Natural gas or LPG). If not supplied with the appliance
it can be purchased by contacting the After-Sales Service.
Connecting the cooker to Natural gas
you place the sealing washer between them (as shown in fig. 2.2).
2. Connect the cooker to the gas supply using a suitable rubber hose (internal diameter
The hose must comply with the applicable local regulations and be of the correct
construction for the type of gas being used.
3. Make sure that the hose is tightly and securely fitted at both ends.
4. Use a standard hose clamp (not supplied) to fasten the hose.
Connecting the cooker to LPG
1. If not already fitted, fit the LPG hose holder on the inlet pipe, making sure that you
place the sealing washer between them (as shown in fig. 2.2).
5. Install a gas pressure regulator.
Important!
To comply with applicable local regulations, a gas pressure regulator (conforming
to the local regulations in force) must be installed when connecting the cooker to an
LPG cylinder.
When connecting the cooker to the gas supply with a rubber hose, make sure that
the hose is as short as possible, without twists or kinks.
the hose is not longer than 750 mm (or refer to applicable local regulations) and does
not come into contact with sharp edges, corners or moving parts. Use a single rubber
the hose is not under tension, twisted, kinked, or too tightly bent, neither while the
appliance is in use nor while it is being connected or disconnected.
the hose does not come into contact with any part of the cooker with a surface
temperature of 70°C or above (or refer to applicable local regulations).
the hose is not subject to excessive heat by direct exposure to flue products or by
contact with hot surfaces.
the hose can easily be inspected along its entire length to check its condition.
replaced regardless of its condition after a maximum of three years.
you inform the customer that the gas cylinder valve or the gas supply valve immediately
by the cooker should be closed when the cooker is not in use.
you inform the customer that the hose should not be subjected to corrosion by acidic
cleaning agents.
After connecting the cooker to the gas supply, make sure that you
check that the connections are correctly sealed using a soapy solution, but never a
naked flame.
check whether the injectors are correct for the type of gas being used. If not, follow the
instructions under GAS MAINTENANCE .
replace the sealing washer/s on the slightest sign of deformation or imperfection. The
use two spanners when fitting the hose holder (fig. 2.2).
with the product in a separate kit; if not supplied with the appliance
they can be purchased by contacting the After-Sales Service.
Manifold
male
Natural gas
(not supplied)
Lpg ng
Rubber hose (not supplied)
(internal diameter 6 mm)
(internal diameter 15 mm)
Fig. 2.2
(#) If not already fitted on the inlet pipe
it is supplied with the appliance in a
separate kit
sealing washer.
If fitted, remove the hose holder from the terminal fitting of the inlet pipe.
When connecting the cooker to the gas supply with rigid pipes or a flexible pipe
make sure that
you use rigid pipes or a flexible pipe complying with applicable local regulations. The
flexible pipe shall be of the correct construction for the type of gas being used.
if compression fittings are used, you tighten them firmly using two spanners (fig. 2.3).
the connection with rigid metal pipes does not cause stress or pressure to the gas
piping.
the flexible pipe is not under tension, twisted, kinked or too tightly bent, neither while
the appliance is in use nor while it is being connected or disconnected.
the flexiple pipe does not exceed 2000 mm in length (or refer to applicable local
regulations) and does not come into contact with sharp edges, corners or moving
parts. Use a single flexible pipe only; never connect the cooker with more than one
flexible pipe.
it has an expiry date, it should be replaced before that date.
if using a flexible pipe which is not entirely made of metal, make sure that it does not
come into contact with any part of the cooker with a surface temperature of 70°C or
above (or refer to applicable local regulations).
the rigid or flexible pipe is not subject to excessive heat by direct exposure to flue
products or by contact with hot surfaces.
the rigid or flexible pipe is replaced if it shows signs of wear or damage.
a gas pressure regulator, in compliance with the applicable local regulations, is
installed when connecting to an LPG cylinder.
you inform the customer that the cylinder valve or the supply valve immediately by the
appliance should be closed when the cooker is not in use.
you inform the customer that the rigid or flexible pipe should not be subjected to
corrosion by acidic cleaning agents.
use two spanners when connecting the rigid or flexible pipe (fig. 2.3).
ACCESSORIES 1 Tray, 1 Shelf, 1 Grill-pan
Ex 166 fg
W: 1000 mm
H: 900 mm
D: 600 mm
10 0%
The manufacturer cannot be held responsible for possible inaccuracies due to printing or transcription errors in the
The manufacturer reserves the right to make all modifications to its products deemed necessary for manufacturer
commercial reasons at any moment and without prior notice, without jeopardising the essential functional and safety
Le fabricant n’est pas responsable des erreurs éventuelles, dues à des fautes de frappe ou d’impression, susceptibles
Il se réserve le droit, sans porter préjudice aux caractéristiques essentielles, du point de vue fonctionnel et du point
de vue sécurité, d’apporter à ses produits, à tout moment et sans préavis, toutes les modifications éventuellement
are for your own safety and that of others. They will also provide
The appliance guarantee will be void if the appliance is used
After having unpacked the appliance, check to ensure that it is
After use, ensure that the knobs are in the off position.
Clean the oven regularly and do not allow fat or oils to build up in
door to allow steam and hot air to escape before removing the
contact separation in all poles that provide full disconnection under
Failure to comply with this condition will render the guarantee invalid.
200 mm
650 mm
500 mm
450 mm
20 mm
1.2).
+ 8 mm
+ 8
+ 15 mm
4. Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can
6. Push the cooker against the wall so that the anti-tilt bracket is fully inserted in the slot
= =
The room where the gas appliance is to be installed must have a natural flow of air so that
room which is ventilated as required, as long as it is not a bed room or a danger area (in
In this case, the kitchen door must allow the passage of the air.
There must be a distance of at least 650 mm between the hob of the cooker and any wall
Extractor hoods connected directly to the outside must be provided, to allow the products
window; the fan should have a capacity to circulate air at an hourly rate of 3 to 5 times the
The fan can only be installed if the room has suitable vents to allow air to enter, as described
proper gas pressure regulator which must be adjusted to guarantee the correct
Ensure that the room in which the cooker is to be installed is adequately ventilated, in
The gas supply is connected at the rear of the cooker to the right or left terminal of the
1. If not already fitted, fit the Natural gas hose holder on the inlet pipe, making sure that
15 mm).
6 mm).
the hose is replaced at the printed due date or if it shows signs of wear or damage, and
sealing washer/s is/are the part/s which guarantee/s a good seal in the gas connection.
the flexible pipe can easily be inspected along its entire length to check its condition; if
Freestanding Cooker 100 cm Gas, Catalytic Cleaning Panel Stainlesss steel cooktop 18/10 6 Gas burners + 1 triple ring Enamelled cast-iron pan-supports Automatic ignition Safety devices on all burners Cast-iron wok stand Easy to clean enamel
FEATURES Thermostatic gas oven 30 M-bar regulator Forced air convection mode Automatic ignition Safety devices on oven/grill Rotisserie function Double glass door + light
Dimensions and finish
External dimensions
Finish
surface, which may result in shattering of the glass.
height of the cooktop.
door handle when raising to the upright
DIMENSIONS External dimensions W 1000 mm x H 900 mm x D 600 mm
Electrical and installation
Total electric absorption: 60 W
Total gas absorption: 20500 W
Gas, Catalytic Cleaning Panel
Gas connection made using rubber
hose which must be visible and
Gas connection made using rigid or
total volume of the kitchen (fig. 1.11).
Gas installation requirements
pressure) and the adjustment of this appliance are compatible. The appliance
gas inlet pipe (fig. 2.1 A). The connection pipe must not cross the rear of the appliance.
inlet pipe
Plug (#)
Plug
Gas connection with a rubber hose
hose only; never connect the appliance with more than one rubber hose.
Gas connection with rubber hose holders
Gas connection with rigid pipes or a flexible pipe
Energy class A+ 60 W Total electric absorption 20500 W Total gas absorption
Documents
Data Sheets: IT0022423
Manuals: IT0022423
Add to Wishlist
Add to Wishlist

## Related

- [Cooking Appliances](https://kitchenbypro.com/category/cooking-appliances/)
- [Shop](https://kitchenbypro.com/shop/)