# Elba EL 14B DW Built-In Plate Warmer 60 cm

> Elba, AED 2,426, in stock at KitchenByPro.

Canonical: https://kitchenbypro.com/shop/product/elba-el-14b-dw-built-in-plate-warmer-60cm/

| Field | Value |
| --- | --- |
| Brand | Elba |
| Price | AED 2,426 |
| Availability | In stock |
| SKU | IT0022515 |

## Specifications

| Specification | Value |
| --- | --- |
| Size | 60cm |

## Description

Functions and performance
Built-In Dishwarmer 60 cm
Telescopic Drawer, Black Line Collection
Push-pull opening system
Telescopic drawer with anti-sliding material
6 Place setting, 110 mm usable height
Illuminated switch on-off pilot
Temperature range: 30° to 80°C
Leavening
Slow cooking
Pre-heating
Keep warming
Fermentation
Head Office / Showroom Dubai
PO Box 37959, Dubai
Showroom Abu Dhabi
PO Box 28239, Abu Dhabi
Service Center
Uae 600 555 602
Mvpappliances.com
Made in Italy
Elba quality
Dear Customer
Thank you for having purchased and given your preference
The safety precautions and recommendations reported
below are for your own safety and that of others. They
features offered by your appliance.
Please preserve this booklet carefully. It may be useful
in future, either to yourself or to others in the event that
doubts should arise relating to its operation.
This appliance must be used only for the task it
has explicitly been designed for, that is for cooking
foodstuffs. Any other form of usage is to be considered
as inappropriate and therefore dangerous.
The manufacturer declines all responsibility in the
event of damage caused by improper, incorrect or
illogical use of the appliance.
Declaration of ce conformity
heating a room) is improper and dangerous.
This appliance has been designed, constructed, and marketed in compliance with
Important safety precautions and recommendations
solely for household applications and is not suitable for any
non domestic application and therefore should not be used
within a non domestic environment i.e. a semi commercial
commercial or communal environment.
Read the instructions carefully before installing and using
This appliance has been designed and manufactured in
compliance with the applicable standards for the household
cooking products and it fulfills all the safety requirements shown
in this manual, including those for surface temperatures.
Some people with sensitive skin may have a more pronounced
temperature perception with some components although these
parts are within the limits allowed by the norms.
The complete safety of the appliance also depends on the correct
use, we therefore recommend to always pay a extreme attention
while using the product, especially in the presence of children.
not damaged and that the warming drawer closes correctly.
In case of doubt, do not use it and consult your supplier or a
professionally qualified technician.
Packing elements (i.e. plastic bags, polystyrene foam, nails
packing straps, etc.) should not be left around within easy reach
of children, as these may cause serious injuries.
Some appliances are supplied with a protective film on steel and
aluminium parts. This film must be removed before using the
appliance.
recommended when handling or cleaning this appliance.
Do not attempt to modify the technical characteristics of
the appliance as this may become dangerous to use. The
manufacturer declines all responsibility for any inconvenience
resulting from the inobservance of this condition.
Do not operate your appliance by means of an external timer or
separate remote-control system.
Do not carry out cleaning or maintenance operations on the
appliance without having previously disconnected it from the
Do not use a steam cleaner because the moisture can get into
the appliance therefore making it unsafe.
Do not cover the interior of the warming drawer with aluminium
foils.
Do not touch the appliance with wet or damp hands (or feet).
Do not use the appliance whilst in bare feet.
If you should decide not to use this appliance any longer (or
decide to substitute another model), before disposing of it, it
is recommended that it be made inoperative in an appropriate
manner in accordance to health and environmental protection
regulations, ensuring in particular that all potentially hazardous
parts be made harmless, especially in relation to children who
could play with unused appliances.
The various components of the appliance are recyclable. Dispose
of them in accordance with the regulations in force in your country.
If the appliance is to be scrapped, remove the power cord.
Children less than 8 years of age shall be kept away unless
continuously supervised.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
The manufacturer declines all liability for injury to persons or
damage to property caused by incorrect or improper use of the
become hot; they remain hot for some time after use.
Care should be taken to avoid touching heating elements inside
To avoid burns and scalds, young children should be kept away.
Make sure that electrical cables connecting other appliances in
the proximity of the warming drawer cannot become entrapped in
safety requirements laid down for this type of product category.
However special care should be taken around the rear or the
underneath of the appliance as these areas are not designed or
intended to be touched and may contain sharp or rough edges
drawer.
these instructions
Furnish the interior of the warming drawer as described in the
chapter CLEANING AND MAINTENANCE .
Switch on the empty warming drawer on max to eliminate
grease from the heating elements.
Disconnect the appliance from the electrical power supply
let the warming drawer cool down and clean the interior of
the warming drawer with a cloth soaked in water and neutral
detergent; then dry carefully.
scrapers to clean the warming drawer front panel glass and inner
result in shattering of the glass.
FIRE RISK! Do not store flammable material in the warming
Always use oven gloves when removing the crockery and food
trays from the warming drawer whilst hot.
to build up in the warming drawer base or tray. Remove spillages
as soon as they occur.
Do not stand on the open warming drawer.
Be careful not to hit the warming drawer when it is in the open
position.
Always stand back from the appliance when opening the warming
a time as possible before and after cooking. This is to avoid
contamination by organisms which may cause food poisoning.
Take particular care during warmer weather.
The appliance must not be installed behind a decorative door in
order to avoid overheating.
to place the food directly on its surface. When cooking, always
place the food in special containers or use specific materials
suitable for the food contact.
If the power supply cable is damaged, it must be replaced only
by an authorized service agent in order to avoid a hazard.
If the appliance is not fitted with a supply cord and a plug, or with
other means for disconnection from the supply mains having a
overvoltage category III conditions, means for disconnection
must be incorporated in the fixed wiring in accordance with the
wiring rules.
during use.
Care should be taken to avoid touching heating elements.
Use of the appliance, energy saving tips
Check the warming drawer always closes properly. During use, open the drawer only
when strictly necessary to avoid heat losses.
Avoid keeping the warming drawer on without something in it.
Turn off the warming drawer 5 to 10 minutes before the end of the theoretical warming
time to recuperate the stored heat.
We recommend using oven proof dishes and adjusting the temperature during the use
if necessary.
Important information for correct disposal of the product in
At the end of its working life, the product must not be disposed of as
urban waste. It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative
consequences for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need
to dispose of household appliances separately, the product is marked
with a crossed-out wheeled dustbin.
Advice for
Important
The appliance is designed and approved for domestic use only and should not be
installed in a commercial, semi commercial or communal environment.
Your product will not be guaranteed if installed in any of the above environments
and could affect any third party or public liability insurances you may have.
This appliance is to be installed only by an authorised person according to the current
local regulations and in observation of the manufacturer’s instructions.
Incorrect installation, for which the manufacturer accepts no responsibility, may cause
personal injury of damage.
This appliance shall only be serviced by authorized personnel.
Always disconnect the appliance from mains power supply before carrying out any
maintenance operations or repairs.
Some appliances are supplied with a protective film on steel and aluminium parts.
This film must be removed before using the cooker.
handling or installing this appliance.
The appliance must be housed in heat resistant units.
The walls of the units must be capable of resisting temperatures of 70 °C above
room temperature.
We would point out that the adhesive which bonds the plastic laminate to the
furniture must withstand temperatures not less than 150 °C to avoid delamination.
Do not install the appliance near inflammable materials (e.g. curtains).
Warning
When correctly installed, your product meets all safety requirements laid down for
this type of product category.
However special care should be taken around the underneath of the appliance as
this area is not designed or intended to be touched and may contain sharp or rough
edges, that may cause injury.
550 min
Fig. 1.1
Fig. 1.2
Fig. 1.3
The drawer can be fitted in standard units, width and depth 60 cm.
On the lower side, the drawer must lay on supports standing the drawer weight.
a fixed internal shelf able to support the weight of both the drawer and the second
appliance, which can be placed directly on the drawer, without any need for a
separating shelf (fig. 1.2).
The two appliances should be connected to the electrical supply with independent
connections.
Remember the housing should not be free standing but be secured to the wall and/or
adjacent fittings.
Do not seal the drawer into the cabinetry with silicone or glue; this makes future
servicing difficult. The manufacturer will not cover the costs of removing the
drawer, or of damage caused by this removal.
The walls surrounding the appliance must be made of heat-resistant material.
Fastening the warming drawer
Before you install the drawer, make sure that the work surface is square and level, and no
structural members interfere with space requirements previously indicated.
To fasten the warming drawer, proceed as follows
place the warming drawer on the shelf and slide it towards the interior of the unit.
Check that the drawer is centred and lined up with the front of the unit, and that its
drawer is aligned with the other appliance. Proceed as described in the section
Entitled aligning the food-warmer drawer with another appliance
Installed .
Open the drawer and fasten it to the sides of the unit by screwing the two screws (not
supplied) A (fig. 1.3).
After the warming drawer is installed, the bottom of the appliance must no longer be
accessible.
Aligning the food-warmer drawer with another appliance
Installed
to adjust the depth of the food-warmer drawer, slacken screws A (fig. 1.4) and adjust
brackets B (fig. 1.4) until the front panel is aligned with the other appliance.
Tighten screws A (fig. 1.4) again until tightly fastened.
The inclination of the front panel can
be adjusted after slackening screws
A (fig. 1.5). When the panel is parallel
to the cabinet and to the front of the
appliance installed in combination with
it, tighten screws A (fig. 1.5) again
until tightly fastened.
Fig. 1.5
Pannello
frontale
Fig. 1.4
front panel
The connection to the electrical
network must be carried out by
qualified personnel and must be
according to existing norms.
The appliance must be connected to
the electrical network verifying above
all that the voltage corresponds to the
value indicated on the specifications
plate and that the cables section of
the electrical plant can bear the load
which is also indicated on the plate.
If the appliance is supplied without a
connecting directly to the mains, a
standardized plug suitable for the load
The colours of the wires in the
appliance power cable may not
correspond with the colours marked
on the terminals of your electrical plug.
The plug should always be wired as
follows
connect the green/yellow wire to the
terminal marked with the letter E
or the earth symbol or coloured
green/yellow
connect the blue wire to the
terminal marked with the letter N
connect the brown wire to the
terminal marked with the letter L
The bi-polar plug must be connected to
an outlet connected to the grounding
unit in conformity to security norms.
If the appliance is to be connected
directly to the mains, it must be placed
with an omnipolar switch with minimum
opening between the contacts of 3 mm
between the appliance and the mains.
The power supply cable must not touch
the hot parts and must be positioned
so that it does not exceed 50 °C at any
point.
Once the appliance has been installed
the switch or socket must always be
If the power supply cable is damaged it
must be substituted by a suitable cable
available in the after sales service.
N.B. For connection to the mains, do
not use adapters, reducers or branching
devices as they can cause overheating
If the installation requires alterations to the
domestic electrical system call an expert.
He should also check that the domestic
electrical system is suitable for the power
absorbed by the appliance.
The connection of the appliance to the
grounding unit is mandatory.
responsibility for any inconvenience
resulting from the inobservance of this
condition.
Before carrying out any work on the
electrical section of the appliance, it
must be disconnected from the mains.
IMPORTANT: The appliance must be
installed by a qualified technician
according with the current local
regulations and in compliance with the
manufacturer instructions. Incorrect
damage to people, animals or property
for which the manufacturer accepts no
responsibility.
authorised service agent in order to avoid a hazard.
NOTE: The earth conductor must be left about 3 cm longer than the others.
The operations must be executed by a qualified technician.
Feeder cable specifications
220 V ac AWG 18/3 (*)
(*) Connection possible with plug and outlet
User guide
1. Glass surface (some models only)
2. On/Off pushbutton
3. Temperature control knob
4. On/Off indicator
Notes
The knobs and symbols may vary.
The symbols may be printed on the knob itself or on the control panel.
General features
The warming drawer is equipped with an
electrical heating element and a fan. The
heat produced by the heating element and
distributed throughout the drawer by the
fan warms the crockery quickly and evenly.
Models with non-slip mat: The non-slip
mat on the base of the drawer prevents
the sliding of crockery when the drawer is
opened and closed.
Note
When using the drawer for the first time, in
order to eliminate any traces of substances
or odours left over from the production
process, switch the drawer on and run it
empty, keeping the installation environment
sufficiently ventilated, for at least 1 hour
with the control knob on .
When the drawer has cooled down
completely, unplug it from the mains power
socket and clean inside it as described in
Cleaning and maintenance .
ATTENTION: During use the
appliance becomes hot. Care should
be taken to avoid touching heating
elements inside the drawer.
Do not store food or beverages
inside the drawer, as their moisture
could damage the appliance.
NOTE: The knobs and symbols may
vary. The symbols may be printed on
the knob itself or on the control panel.
Fig. 2.2
Rotate the knob between the minimum and
the maximum position until the required
temperature is reached. This only sets the
cooking temperature but does not switch
Caution: Never force the thermostat
and the minimum position. This might
damage the appliance.
The heating element turns off when the
selected temperature is reached and turns
back on when it decreases.
Fig. 2.1
Use of the warming drawer
To use the warming drawer, proceed as
put the crockery or food in the drawer.
Select the temperature by rotating the
thermostat control knob to the desired
Switch on the drawer by pressing the
pushbutton (fig. 2.1).
When the drawer is closed, it is
possible to check whether the
appliance is functioning by looking at
the indicator light on the front panel.
After the crockery or food has warmed
up, turn off the drawer by pressing the
pushbutton and then take the crockery
out.
Depending on your model
Your appliance may only have
Some of these functions.
Defrosting frozen food
This function allows to gently defrost frozen
food.
Only the fan is switched on.
The defrosting times vary according to the
quantity and type of foods to be defrosted.
Leavening or yogurt
This function cuts the time it takes for your
dough to rise.
Put the dough in a suitable dish, cover
it with a damp cloth and place it in the
warming drawer. Set the knob on .
Leavening times may vary according to
dough type and room temperature.
Yogurt fermentation
Heat up 1 L of fresh full-cream milk
at 80 °C, then let it cool down to 40 °C.
Add 2 spoons of natural yogurt with
living culture.
To store the yogurt, use jars with screw
lids. If possible, sterilize them before
use.
Fill the jars with the mixture, close
them and place them in the centre
of the warming drawer. Leave some
space between jars, in order to let air
circulate around them.
Set the knob to and switch on the
When the yogurt is ready, store it in the
fridge.
Heating cups
This function allows the optimal preheating
For heating times, refer to the HEATING
TIME section.
Heating plates
of plates and serving dishes.
Keeping food warm
To keep meals warm, cover the dish with
a heat resistant lid or aluminium foil, place
it in the drawer and set the thermostat on
introducing the food.
The use of the warming drawer to keep
meals warm is recommended for meat
poultry, fish sauces, vegetables, garnishes
It is recommended to warm meals in the
warming drawer for maximum 1 hour.
Caution! (Some models only) Do not
place hot saucepans or pans in the
warming drawer as this could damage
tender and can be kept warm.
To slow cook meat in the warming drawer, proceed as follows
Preheat the tray following the instructions in USE OF THE WARMING DRAWER .
Only use a suitable glass, porcelain or ceramic tray.
Brown the meat with oil or butter.
Place the tray in the drawer and set the thermostat on .
Caution! (Some models only)
Do not place hot saucepans or pans in the warming drawer as this could damage
El 14b dw
W 595 mm x H 139 mm x D 535 mm
W 560 mm x H 140 mm x D 550 mm
10 0%
will also provide a means by which to make full use of the
This appliance has been designed to be used only for cooking. Any other use (such as
The appliance guarantee will be void if the appliance is used
After having unpacked the appliance, check to ensure that it is
After use, ensure that the knobs/controls are in the off position.
Clean the warming drawer regularly and do not allow fat or oils
drawer door to allow steam and hot air to escape before removing
contact separation in all poles that provide full disconnection under
Failure to comply with this condition will render the guarantee invalid.
556 to 564
A a
If the food-warmer drawer is not aligned with the appliance with which it is installed, proceed
220 to 240 V ac 3 x 0.75 mm2 (*)
Place the meat in the pre-heated tray and cover it with a heat resistant lid or cling film.
Built in Warming Drawer 14 cm Full black glass Push-push opening system Sliding telescopic rails Easy to clean inner removable temperate glass surface 6 place setting, 110 mm usable height 24 L capacity
Temperature range 30° to 80°C knob control Special functions leaving, slow cooking, pre-heating, keep warming, yogurt fermentation Illuminated switch on-off pilot 220 to 240 V / 50 to 60 Hz (cables without plug)
Dimensions and finish
Finish
External dimensions
Cutout dimensions
glass surface since they can scratch the surface, which may
Installation requires a compartment as illustrated in figures 1.1 or 1.2.
Installation in combination with another appliance: The housing unit must have
frame is levelled and sitting evenly on the shelf.
Installation in combination with another appliance: check that the food-warmer
installation may cause harm and
control knob between the maximum
Electrical and installation
power supply plug and if you are not
Connection of the power supply cable
Documents
Data sheet: IT0022515
drawings: IT0022515
Manual: IT0022515
Add to Wishlist
Add to Wishlist

## Related

- [Cooking Appliances](https://kitchenbypro.com/category/cooking-appliances/)
- [Shop](https://kitchenbypro.com/shop/)